Sterile
Non-Pyrogenic
1 Unit, 72" Long
Approximately 20 drops/mL

Directions:

1. Prepare I.V. container
2. Remove set from pouch and close roller clamp.
3. Remove spike protector from spike.
4. Insert spike into container
5. Hang container, fill drop chamber by squeezing until approximately half filled.
6. Remove protector from adapter.
7. Open roller clamp. Prime set and purge air from tubing.
8. Attach adapter to venipuncture device.
9. Adjust fluid with roller clamp.
10. Check maintenance of proper flow rate at regular intervals.

Sterile in unopened, undamaged package. Do not use if tip protectors are not in place.

Cautions:
• Avoid freezing and excessive heat.
• Replace per CDC guidelines and/or hospital policy.
• For single use only. Do not resterilize.
• Do not allow air to be trapped in set.
• Puncturing drip chamber or tubing may cause air embolism.
• Not for insertion into blood or plasma containers.