DIRECTIONS:
FITTING THE NEEDLE :
• 1- Unscrew cap until flush with nozzle.
• 2- Slot needle in.
• 3- Screw down cap.
PRIMING:
• 1- Set dose at 12.5ml and pump injector until fluid begins to fill the barrel.
• 2- Hold applicator vertical, flick barrel until bubble is centered then carefully squeeze until bubble disappears.
SET DOSE:
CLEANING AND LUBRICATION:
• 1- after use, flush the applicator with hot soapy water, rinse.
• 2- Unscrew barrel.
• 3- Lubricate piston o'ring with olive or cooking oil and replace barrel. Cleanings for current liquid -will refill automatically
CAUTION: DO NOT REMOVE O RING
Other product information:
The Injector barrel with o ring, is 3-1/4 inches long made of clear plastic, the needle nut fits at the end of the barrel and is blue, and 1-1/8 inches long , The clear tubing is 48 inches long. The overall from the needle nut to the end of the dose adjuster (which sticks out past the handle is 8-1/4 inches long).
Note:
The large draw off fits 250-1000 bottles with a 30 mm neck the small draw off fits 50-100 ml bottles with 20mm neck.