Directions

The Sunny Seat can be attached to any smooth surface, double paned or insulated paned window or sliding door.

Assembly & Mounting

Thoroughly clean the mounting surface and the suction cups to ensure a proper seal between the suction cup and the glass.
Attach left, middle and right sides of the base, then attach the two suction cups to the base ends.
Thread cables through the slits in the fabric cover. Slide the fabric cover onto the base from the curved side towards the suction cups so it fits snugly.
Attach the cable's plastic tips to the suction cups. Firmly press one end of the plastic tip into the center base hole of the suction cup, angling it toward the right inside hole of the suction cup, then push the other end of the plastic tip towards the left inside hole, making a 'T' shape with the plastic tip and cable, within the suction cup. Apply same method to both suction cups.
Mount the Cat Bed to ensure a horizontal level by first attaching the bottom suction cups (press directly on center of suction cup), then the upper suction cups. Select a height that allows your cat easy access.

Precautions

Do not open either the chosen window or door when the cat is enjoying the Sunny Seat Cat Bed.
Use of the Cat Bed on a single paned, antique, tinted or textured glass is not recommended due to the risk of breakage.
Do not mount above anything valuable, breakable or anything that could harm your pet.
Do not place your Sunny Seat Cat Bed above an open flame or other source of significant heat. Traditional radiant heaters are acceptable.
Do not place our Sunny Seat Cat Bed where a person or other animal could be injured.
Inspect and re-secure suction cups as necessary. Over time the seal may weaken and need to be reestablished.
Do not allow more than two cats on

Sunny Seat